ACI – Air Control Industries
ACI industrial fans and blowers
ACI blower driven drying systems
ACI personnel cleaning/de-dusting systems – the Jetblack
ACI spares and accessories
ebm papst, KIMO and
ACI newsletters

ACI Fans & Blowers

Fan Questionnaire

If you have an application it would help our engineers to have as much information on your system as possible. The list of questions below is not exhaustive but they will give us an idea to the type of fan required which will help us to expedite your enquiry more accurately.

If you have a more general enquiry, please use our standard contact form or to return to the fan page you were viewing previously, click here

  Fields marked * are required
1. Fan Duty
If the required fan duty is known please enter below but also check all other questions to ensure any additional features are covered.
Pressure mBar (In Wg)
Flow m3/hr (cfm)
2. Application
 Please provide as much information on the application of the fan as possible. For example – ventilation, fume extraction, vacuum table, etc.
3. Blower or Exhauster – Is the fan going to be used on its inlet or discharge side. (ie. Sucking or blowing).
Blower
Exhauster
4. Ventilation
If the fan is going to be used for ventilation please provide the following information:
Size of room/enclosure

Length Width Height (metres)

or Total Volume (m3)

No. of air changes per minute
Restrictions to air flow – filters, louvres, restricted space at inlet or discharge of fan etc.
Cooling – If the fan is going to be used for cooling please provide as much information as possible.
How many watts to be dissapated?
Allowable temperature rise above ambient? Degrees centigrade
Temperature of product at start and desired temperature we will also require as much information on the product size, shape and material.
5. Temperature
What is the air inlet temperature to the fan? Degrees centigrade
6. Contaminants  
Are there any airborne particles or vapours likely to be drawn into the fan? If so please provide as much information as possible.
7. Filtration  
Is there any filtration required on the inlet or discharge of the blower? Please provide details.
8. Size  
What space restrictions do you have for installing the fan? Please also include details on the required inlet and discharge sizes and types required.
9. Ducting  
If the fan is going to be used in conjunction with ducting, solid or flexible, then please provide full details.
10. Supply Voltage  
What are your voltage requirements?
11. Noise  
Please indicate any noise restrictions
12. Discharge angle  
Please provide us with relevant information

 

Air Control Industries Ltd
Silver Street, Chard, Somerset, TA20 2AE, UK

Tel: +44(0)845 5000 501
Fax: +44(0)845 5000 502

ACI Resources

 

ACI, Air Control Industries Ltd information ACI Enquiry Form ACI Pre/Post Sales Support details ACI information centre, including literature ACI Global network of Agents ACI Case Studies for its range of air movement products

Industrial Blowers - Industrial Centrifugal Blowers - Centrifugal Fans - Ventilation & Cooling Fans - Radial Blower - Air Knifes - Fans And Blowers - Axial Fans - Industrial Fan - Blower Fan - EBM Papst - Vacuum Table - Drying Systems Spares