EV-Fans---Group-Fan-Photo

Euroventilatori’s range of radial fans offer flow rates of up to 212,000 m³/hr (360,000CFM), and pressures up to 300Mbar (120 In.Swg), with 2, 4 and 6 pole options. Available in a choice of finishes and standards (including mild steel and stainless steel versions) many of the units are also available in ATEX rated versions.

All our radial fans have the option of a direct-drive or belt-driven alternative.

Overview - Euroventilatori Fans

A wide selection of Euroventilatori radial fans are shown below, but if you require further information, visit Euroventilatori’s website.

 

Not sure which radial fan you need? 

Call us on 207-445-2518 to discuss your application with us.

logo-euroventilatori

Air Control Industries Ltd is the official UK distributor for Euroventilatori Radial Fans.

AP Series

Centrifugal medium and high-pressure fan. Directly Coupled Motor.

The AP series are particularly suitable for the suction of very dusty air and pneumatic conveying in environment such as cement factories, foundries, chemical, metallurgical and iron industries where small capacities with medium and high pressures are required.


  • APE 2 Pole: Flow rates up to 2,000M³/Hr / Static Pressures up to 57In.Swg 

  • APF 2 Pole: Flow rates up to 8,100M³/Hr / Static Pressures up to 68In.Swg

  • APG 2 Pole: Flow rates up to 18,000M³/Hr / Static Pressures up to 74In.Swg

  • APR (F-L): Flow rates up to 50,000M³/Hr / Static Pressures up to 86In.Swg

MPRSeries

MPR Series

Low and medium-pressure centrifugal fan. High Efficiency and low-noise reverse blade impeller. Directly coupled motor.

Particularly useful for sucking in very dusty air, the MPR Series are characterized by a very flat curve of the absorbed power, which does not overload the motor when working with open inlets.  Application examples include joineries for the conveying of saw dust and wooden shavings; in mechanical industries for sucking in metal chips; in pneumatic transport for applications in cement factories, ceramic factories, mills, foundries, textile and chemical Industries and in general applications where it is necessary to transport harmful air with low and medium pressure.

  • MPR Series: Flow rates up to 5,500M³/Hr / Static Pressures up to 18In.Swg

BPR Series

BPR Series

Low pressure, high volume backward curved radial fans. 2, 4 and 6 pole direct drive options are available with further belt driven alternatives.

These fans are useful for the removal of clean or slightly dusty air. They have high efficiency and reduced noise levels. The BPR series is largely used in ventilation, conditioning, drying, cooling, mechanical draft, and toxic gas elimination plants.

The temperature of the fluid transported must not exceed 80°C without cooling fan and 150° C with cooling fan. For higher temperatures it will be necessary to modify the fan construction.

BPR Series 2 Pole

  • BPR 2 Pole (1): Flow rates up to 11,900M³/Hr / Static Pressures up to 9in.Swg

  • BPR 2 Pole (2): Flow rates up to 23,800M³/Hr / Static Pressures up to 15In.Swg

BPR Series 4 Pole


  • BPR 4 Pole (1): Flow rates up to 15,300M³/Hr / Static Pressures up to 4.5In.Swg

  • BPR 4 Pole (2): Flow rates up to 47,600M³/Hr / Static Pressures up to 9In.Swg

  • BPR 4 Pole (3): Flow rates up to 95,200M³/Hr / Static Pressures up to 14In.Swg

EU-EUM-4-Pole-Product-Photo1
EU-2-Pole-Product-Single-Photo

EU / EUM Series

Low and medium-pressure centrifugal fan. High efficiency and low-noise reverse-blade impeller. Directly coupled motor.

Particularly useful for sucking in very dusty air, these fans are characterized by a very flat curve of the absorbed power, which does not overload the motor when working with open inlets. Particularly useful for sucking in very dusty air. These fans are characterized by a very flat curve of the absorbed power, which does not overload the motor when working with open inlets.

Examples of applications include joineries for the conveying of saw dust and wooden shavings; in mechanical industries for sucking in metal chips; in pneumatic transport for applications in cement factories, ceramic factories, mills, foundries, textile and chemical Industries and in general applications where it is necessary to transport harmful air with low and medium pressure.

TQetc

TQ/TPA/TF/TG/TH Series

Product conveying series – direct drive and belt driven options. Impeller designs for medium and high pressure.

This fan is commonly used for the suction of very dusty air containing various types of materials in suspension. Examples of applications include joinery works – transport of saw dust and wooden shavings; tanneries – for the transport of trimmings and skin shavings; plastics industry for transporting raw materials including granules and trimmings.

Please visit the Euroventilatori website for more information:

BT-Series-Axial-Fan

BT Series

The exhaust towers high capacity centrifugal fan wheel with wing-profile blades.

These units are suitable for the suction of vitiated air flue gases and vapour from the environment. They are very useful during the summer season in those environments where air changes are necessary in order to keep the room ventilated.
They are also used for the aeration of workshops, foundries, cement factories, tanneries, joineries, and for chemical mechanical and metallurgical industries where big air volumes have to be sucked at low pressure.

  • Flow rates up to 15,000M³/Hr 

  • Static Pressures up to 2″WG / 50mmWG

Visit the Euroventilatori website for more information – BT Series.