Management Policy

The Company Directors of Air Control Industries Ltd recognise that consistent quality and reliability of products and services are essential to success in business.

ACI is committed to providing products and services in compliance with customer contract expectations and legislative requirements.

ACI will implement and maintain an effective Quality Management System that satisfies the requirements of both ISO 9001 and ISO 14001.

In line with meeting customer satisfaction and product quality obligations, ACI will ensure the following policy requirements by ensuring:

  • Regular business risk assessments to ensure loss minimisation through effective business continuity planning.
  • Technical and commercial review of contracts to ensure customer requirements are identified and planned through to on time delivery.
  • Invest in the necessary resources to ensure management and technical obligations can be achieved in line with business planning. 
  • Develop and maintain strategic partnerships with suppliers and sub-contractors, ensuring regular communication.
  • Ensure personnel at all levels of the business understand their importance with continued personal development.
  • Commitment to continuous improvement, by monitoring the quality of manufactured products.
  • Customer and wider community satisfaction and enhancement of the company’s reputation.

The company recognises the importance of its employees in achieving its business aims and operates a system of training within the Quality Management System to ensure that the necessary skills and motivation exist at all levels to support the company’s policy objectives.

ISO 9001:2015 Certificate


Terms and Conditions – Purchasing from ACI


All orders and contracts place with AIR CONTROL INDUSTRIES (ACI) shall be accepted and executed solely in accordance with the conditions set out below whether or not the Buyer’s conditions or purchase order or acceptance purports to disclaim or negate any of the following conditions. No variations or additions to these conditions of sale will be recognised by the Company unless specifically accepted and confirmed in writing by an officer of the Company.Quotations unless previously withdrawn shall be valid only for the specific period shown on the quotation. All orders verbal or written are accepted at the time that the Company’s written acknowledgement has been dispatched to the Buyer. The Company may refuse to accept and execute any orders placed with it. All quotations made and all orders accepted by representatives or agents of the Company remain subject to confirmation by the company.

Blanket / Call-off Orders: Any agreed blanket purchase orders will be valid for up to a maximum of 12 months or the period agreed in writing by ACI. This period will commence from the initial date stated on the first ACI Order Acknowledgement. Once this time (i.e. 12 months) has expired, any outstanding quantities of goods will be immediately invoiced to the customer. The Company also reserves the right to invoice and ship goods held on stock on the customers’ behalf in the event of a call-off order cancellation.


Unless otherwise specified, packaging and carriage costs shall be in addition to the quoted prices.


The Company will not be responsible for non-delivery or for any delay in delivery or for any loss or damage whatsoever caused directly or indirectly by reason of fire or breakdown at the company’s own premises or that of its suppliers, acts of God, war, strikes, lock-outs, shortages of raw materials or tools or by any other circumstances outside the Company’s control. In such cases the Company may suspend orders or withdraw quotations.

Goods ordered will be dispatched on the quoted delivery date wherever possible, however date of delivery cannot be guaranteed and under no circumstances shall the Company be liable for any consequential loss or damage arising from delay in delivery or by any failure to deliver.Any time for delivery mentioned within a quotation shall date from the receipt by the Company of the Buyer’s acceptance and written order to proceed and/or of all the information drawings (including if necessary approval of ACI issued drawings) and complete specifications needed to complete the order. In particular but without prejudice to the generality of the foregoing forward delivery dates are given in good faith.Delivery shall be affected and the risk shall pass to the Buyer or his authorized agent or any person whom the person effecting delivery reasonably assumes to be so authorized or in the event of delivery being undertaken by an independent contractor, when the goods shall be handed over to the independent contractor or his authorized agent.

Any claims regarding quantities and/or loss and/or damage in transit shall only be considered if made within 72 hours of receipt of the goods. In the case of damage in transit and on specific instructions from the company, the customer shall return the goods securely packed in the original packing carriage paid and quoting the customers advice note, giving the reason for return, the number and date of the company’s invoice.

If the customer is notified that that any goods are due and ready for delivery and shall not thereupon accept delivery of the same, the goods shall (without prejudice to any other consequences) be stored at the Customer’s risk and expense at a reasonable charge but for the purpose of determining the due dates of payment and the passing of the risk the goods shall be deemed to have been delivered when first tendered.


All reasonable care will be taken by the Company to ensure that goods equipment and services conform to the Company’s standards or to the appropriate specification within the limits of reasonable commercial accuracy and tolerance and are of good materials and workmanship.

The Company will only accept responsibility if:

  1. The goods have not been overloaded nor been misused.
  2. The goods shall have been installed in accordance with the wiring instructions provided and any Assembly / Operation & Maintenance instructions issued by ACI. the Buyer shall have been given access to verify the same.
  3. The correct electrical supply specified shall have been used.
  4. No dismantling or repairs have been made to the goods otherwise than by the company or its authorized agent.

The goods shall have been returned carriage paid to the Company or its authorized agent.In addition to any other rights the Buyer may have and provided there are no exceptions to sub-clauses a. to e. inclusive above the Company shall at its discretion repair or replace the said goods free of charge to the Buyer apart from the cost of the goods being returned to the Company which shall be the liability of the Buyer if returned to the Company within (12) twelve months of the date of the delivery note for the goods.

The Company will not accept any liability whatsoever for consequential loss or damage which may in any way arise out of goods, equipment or services supplied or any defects in them. Notwithstanding anything hereinbefore contained, no claims in respect of any defect are received by the Company within 72 hours of delivery.

Air Control Industries Limited (ACI) warrants all products manufactured by ACI to be free of defects in material and workmanship for twelve (12) months from the date of shipment.

The warranty does not apply to drive belts, filter elements or connecting hose or similar. Also, not covered under the warranty is normal wear and tear, neglect or misuse of the equipment, operation in an application not approved by ACI, and alterations not performed by ACI.
All items supplied by ACI that are manufactured by others shall be warranted under the respective manufacturer’s policy. Motors and other items, for which a national service network is in place, should be sent directly to that manufacturer’s representative for the best service. ACI will provide any support required ensuring that warranty service by others in handled in a prompt and professional manner.
It is recommended that in critical applications, a spare fan or blower head assembly is purchased and kept as a spare part.
The Warranty is dependent upon the manufacturers recommended maintenance and servicing being carried out at the time intervals specified in this Manual. It may be necessary to provide proof of this (maintenance records, invoices etc).

Work carried out under the Warranty does not extend the Warranty. In particular, the replacement of a part during work carried out under Warranty does not extend the lifespan of the part. The Warranty which covers the replacement part expires on the date of expiry of your equipment’s Warranty.
Parts replaced under the Warranty become the property of ACI.

At no time will ACI be liable for any of the costs to the buyer for labour, transportation or down-time resulting from defective equipment furnished by ACI or our suppliers.

Damage caused by natural phenomena, hail, flooding, storms or other atmospheric hazards, as well as damage caused by accidents, fire or theft.
Our products are manufactured in compliance with applicable international standards and regulations. If you have any queries regarding the use of our products, or if you are planning a special application, please contact ACI.


The Buyer shall indemnify the Company against all claims in respect of any loss injury or damage sustained by a third party howsoever caused after receipt of goods or services by the Buyer or after the property has passed from the Company whichever is the earlier.


Payment shall be due 30 days following month of invoice. The event of payment becoming overdue the Company reserves the right to charge interest on the invoice price or the balance from time to time outstanding at the compound rate of 6%. Should payment become more than 30 days overdue, the company reserves the right to pass the matter to collection agents and to charge any costs, including the collection agent’s fees, back to the customer.


Catalogues, price lists and other advertising matter are only an indication of the type and range of goods, equipment and services offered by the Company and no particulars therein shall be binding on the Company and they shall not form part of any order or contract between the Company and the Buyer.


The Buyer shall indemnify and keep indemnified the Company against all claims costs damaged and expenses incurred by or for which the Company may become liable as a result of the carrying out of any work required to be done on or to the goods in accordance with the requirements or specifications of the Buyer.


If the Buyer makes default in any payment or commits any breach of the terms and conditions of the order or agreement or suffers distress or execution or becomes insolvent or commits any act of bankruptcy or enters into any arrangement or composition with his creditors or is put into liquidation (other than solely for amalgamation or reconstruction) or if a Receiver is appointed over any part of the Buyer’s business, the Company may without prejudice to any rights which may have accrued or that may accrue to it as is option inter alia:

  1. Require payment in advance for all or any deliveries or
  2. Suspend any further deliveries until such default or breach is rectified or
  3. Cancel the order and/or
  4. Cancel or procure cancellations of any other orders which the Buyer has placed with the Company so far as any goods remain to be delivered there under or
  5. Refuse to execute any order or agreement.


If any license or consent of any Government or authority shall be required for the purchase or importation of the goods by the Buyer the Buyer shall obtain the same at its own expense and if necessary or so required provide evidence of the same to the Company on demand.


12. TITLE:

  1. Notwithstanding delivery and the passing of risk the property on the goods supplied to the Buyer shall remain with the Company and shall not pass to the Buyer until the amount due under the invoice for them has been paid for in full.
  2. Until title passes the Buyer shall hold the goods as bailee for the Company and shall store or mark the goods so that they can at all times be identified as the property of the Company.
  3. The Company shall be entitled at any time before title passes to repossess and dismantle without being liable for any damage caused by so doing and use or sell all or any of the goods and so terminate (without any liability to the Buyer) the Buyer’s right to use or sell or otherwise deal in them and for these purposes to enter any premises of the Buyer.
  4. The Company shall be entitled to maintain an action for the price of any goods notwithstanding that title in them has not passed to the Buyer.
  5. Risk on the goods passes when they are delivered to the Buyer.
  6. If the Buyer fails to take delivery of the goods or any part of them on the due date and fails to provide any instruction documents licenses or authorizations required to enable the goods to be delivered on the due date the Company shall be entitled upon giving written notice to the Buyer to store or arrange for the storage of the goods upon which risk in the goods shall pass to the Buyer and delivery shall have been deemed to have taken place and the Buyer shall have to pay to the Company all costs and expenses including storage and insurance charges arising from its failure.


Terms & Conditions – Selling to ACI



  • BUYER-means AIR CONTROL INDUSTRIES (ACI) via its authorised representatives
  • SELLER- the company contracting with ACI to supply goods or services.
  • DELIVERY LOCATION – means the location specified on the PO to which the GOODS shall be delivered or such other location as is specified by the BUYER.
  • INTELLECTUAL PROPERTY Also known as IP – shall include any patents, trade, and services marks, database rights, registered and unregistered designs, copyright (including copyright in computer software), know-how and confidential, technical and commercial information howsoever recorded).
  • PO- Purchase Order
  • WRITING- includes the post, facsimile transmissions and email.
  • STATUTORY REQUIREMENTS- all laws, permission, consents, codes, bye-laws, rules and regulations and the requirements of any local, national, supra-national agency, public authorities and statutory undertakers or other statutory person or of the Government or the European Union, and any relevant Standard codes of practice including (without limitation) any such requirements with which the BUYER or SELLER is obliged to comply.
  • CONSEQUENTIAL LOSS- any indirect or consequential loss, including loss of savings, loss of profit, loss of use, loss of contract, loss of production, loss of revenue, business interference or increased costs of working howsoever caused, arising out of or in connection with the PO other than losses arising from theft, dishonesty, fraud or misappropriation.


  • The seller acknowledges that the buyer is at all time relying on the skill and knowledge of the seller. These provisions shall therefore apply notwithstanding that the buyer may have included specifications on the drawing or on the Purchase Order.
  • Any goods supplied under a PO shall conform to the specification and:
    1. Be of good and sound design, materials and workmanship
    2. Be of satisfactory quality and fit for the purpose for which they are supplied, if the buyer makes that purpose known to the seller.
  • Conform as to quality and description with the specifications stated by the buyer on any drawing, PO, document or verbally.
  1. Correspond with samples or patterns, if any, that may have been supplied by the buyer.
  2. Comply with all STATUTORY REQUIREMENTS.
  3. Be free from any defect in title.
  • Notwithstanding that the GOODS or any part thereof have been the subject of any inspection, review, approval or acceptance, the SELLER shall not be relieved from any liability or obligation under this contract.
  • If the SELLER plans any changes that may affect the performance of the GOODS it shall inform the BUYER immediately. The BUYER reserves the right not to accept these modifications.


  • The SELLER shall ensure that the GOODS are packaged and carried in a manner consistent with their value and susceptibility to damage in order that they reach the DELIVERY LOCATION in good condition.
  • Unless otherwise agreed by notice or by custom, all packaging and carriage shall be included in the PRICE.


  • GOODS shall be delivered on the dates and at the places specified on a PURCHASE ORDER. Delivery of the goods to a carrier (whether named by the BUYER or not) for the purpose of transmission to the BUYER shall not constitute a delivery of the GOODS to the BUYER.
  • The signed SELLER’S despatch note certifies that the GOODS have been delivered by the SELLER but in no way prejudices the rights and obligations of the BUYER including but not limited to the possibility of rejection.
  • The SELLER has an obligation to notify the BUYER, in the case of any delay in agreed delivery date.
  • If the SELLER fails to ensure DELIVERY of any goods in accordance with PO then following written notice in WRITING to the SELLER, the BUYER may, without prejudice to its other rights, cancel the PO or any part of it.


Both the property and the risk in the GOODS or any part thereof, pass to the BUYER only after delivery, acceptance (in accordance with Para. 8) and payment have occurred.


  • Force Majeure shall mean any event which is beyond the control of the party affected including, without limitation:
    1. Acts of God including flood
    2. Fire or Explosion
  • War or Acts of terrorism
  1. Rebellion or riot
  2. Acts of government
  3. Sabotage
  • Official strike or similar official dispute
  • The BUYER does not accept the following events (without limitation) as being FORCE MAJEURE :-
    1. Unofficial strikes of the SELLER and its SUB-CONTRACTORS
    2. Shortage of labour, materials or other resources unless caused by circumstances which are themselves Force Majeure
  • The party affected by the FORCE MAJEURE shall take all reasonable steps available to it to minimise the effects of FORCE MAJEURE on the performance of its obligations under the PO.
  • If in the BUYER’s reasonable opinion an event of FORCE MAJEURE results in disruption to the provision of the GOODS the parties shall then discuss and make all reasonable endeavours to agree how the GOODS can be manufactured but should

the parties fail to reach agreement the BUYER shall be entitled by giving 1 days notice in WRITING to the SELLER to terminate the PO, termination taking effect upon the expiry of such notice. The parties shall bear their own costs thereto.


  • The price for each unit shall, unless prior agreement is obtained from the BUYER, be inclusive of all charges for packaging, packing, shipping, carriage, insurance if any, of the GOODS to the DELIVERY LOCATION and any duties, imposts or levies other than VAT.
  • No increase in the PRICE may be made without the prior consent of the BUYER


  • Without any prejudice to the BUYER’s other rights, if following DELIVERY of the GOODS and until the GOODS are put into operational use, an inspection shows that the GOODS are not in accordance with PO, DRAWING or any STATUTORY REQUIREMENTS, the BUYER may reject the whole or part of such GOODS.
  • The BUYER shall have the right to require the SELLER, at the SELLER’s risk and expense, to expeditiously replace any rejected GOODS.
  • If the SELLER fails to fulfil its obligations to the BUYER under Condition 8 (REJECTION) then the BUYER may:-
    1. Cancel the PO without prejudice to its other rights and remedies and/or
    2. Deduct from the PRICE (or if the BUYER has paid the price, claim from the SELLER) all extra costs and expenses arising from the delivery of defective GOODS including those of removal, carriage, storage, testing reinstallation, recommissioning and reinstating defective GOODS, purchasing GOODS elsewhere, if appropriate, storage and CONSEQUENTIAL LOSS.
  • Where the SELLER replaces GOODS under any provision in this Condition 8, the same provisions shall apply to the replacement GOODS.


  • Without prejudice to the BUYER’s rights under this agreement and any PO, the SELLER shall at the BUYER’S option repair or replace any defective GOODS at its own expense and to the satisfaction of the BUYER for a period of 12 months from the date when the GOODS have been put into
  • Operational use either following delivery or following the repair, modification or replacement of the GOODS or any part thereof. Where the GOODS are repaired, modified or replaced during the warranty period, the SELLER will warrant the goods for a further period of 12 months.
  • In addition to the remedies under this section and without prejudice to any of its other rights the BUYER shall have the right to recover from the SELLER all costs and expenses arising from the defective GOODS including but not limited to those of removal, carriage and storage, testing, reinstallation and re-commissioning.
  • If one of more items of the GOODS are defective it shall be the SELLERS’s responsibility to prove to the BUYER that the remaining GOODS in the same BATCH are in accordance with the PO, the specifications and drawings provided. If for any

reason this is not possible, the BUYER may demand the replacement of all the GOODS in that BATCH at the SELLER’s own expense.

  • If the SELLER fails to fulfil its obligations to the BUYER under Condition 18 then the BUYER may:-
    1. Cancel the PO without prejudice to its other rights and remedies and/or
    2. Deduct from the PRICE (or if the BUYER has paid the price claim from the SELLER) all extra costs and expenses arising from the delivery of defective GOODS including those of removal, carriage, storage, testing reinstallation, recommissioning and reinstating defective GOODS, purchasing GOODS elsewhere, if appropriate, storage and CONSEQUENTIAL LOSS.
  • If due to the BUYER’s operational requirements or because of an emergency, the BUYER carries out repairs or obtains a replacement, then without prejudice to any of its other rights the BUYER shall have the right to recover from the SELLER all costs and expenses.


The SELLER shall indemnify the BUYER in full against all liability, loss, damages, costs and expenses awarded against or incurred by or paid by the BUYER as a result of or in connection with:

  • Breach of any obligations of the SELLER or otherwise caused or contributed by the neglect, act or omission of the SELLER, its employees, agents, representatives or sub-contractors.
  • Any claim that the GOODS infringe or their importation, use or resale, infringes the patent, copyright, design right, trademark or other intellectual property rights of any other person, except to the extent that the claim arises from the compliance with any design or specification supplied by the BUYER.
  • The SELLER’S failure to deliver the GOODS within the time specified.


The SELLER shall effect and maintain in force such insurance policies as are appropriate and adequate with a reputable insurer having regard to its obligations and liabilities under the this agreement and the SELLER shall ensure that its SUB-CONTRACTORS also maintain adequate insurance having regard to their obligations under this agreement which insurance shall include:

  • Product Liability insurance for an adequate amount to meet all potential claims.
  • General Third Party, Public Liability, Employers’ liability and Professional indemnity insurance should provide sufficient cover to provide for business continuity in the event of any claim.
  • Such POLICIES shall contain a waiver of subrogation rights in favour of the BUYER.
  • The SELLER shall on request provide the BUYER with reasonable details of each of the POLICIES. Failure by the SELLER to comply with this condition may be:
    • Interpreted by the BUYER to indicate that the SELLER has failed to meet its obligations to provide the insurance cover required.
    • The SELLER shall not during the CONTRACT period and for a period of 6 years thereafter do anything to invalidate any of the policies.
    • The taking out of any of the POLICIES in no way releases the SELLER from its legal and contractual responsibilities.
    • The amounts guaranteed by the policies may in no way be interpreted as a limitation of the SELLERS liability towards the BUYER and of third parties. Moreover, the exclusions stipulated in the insurance policies may in no way be interpreted as a limitation of the SELLER’s liability towards the BUYER and/or third parties.


  • Any INTELLECTUAL PROPERTY developed in the performance of or otherwise arising out of any PO or any discussion or meeting including, without limitation, any IP created by the SELLER or the SELLERS STAFF, shall vest in the BUYER, and the SELLER for itself and as agent for the SELLERS STAFF waives in favour of the BUYER all moral or legal rights therein.
  • All IP in any DATA not prepared or developed by the SELLER under or in connection with the provision of an ORDER but which are :
    1. Already vested in the SELLER and
    2. Used by the SELLER in connection with the PO.
  • Shall remain vested in the SELLER but the SELLER hereby grants a non-exclusive irrevocable, royalty-free licence to both the BUYER and to any third party whom the BUYER has authorised or may in the future authorise to use, copy or modify such DATA provided it is to enable the BUYER or such third party to utilise the DATA prepared or developed under or in connection with the PO.
  • The SELLER agrees to take such action at the SELLER’s cost as may be necessary to transfer licence or evidence such transfer of.


  • With the exception of minor items and raw materials the SELLER shall not sub-contract the whole or any part of the PO without prior notification in WRITING to the BUYER.
  • If any SUB-CONTRACTORS are used to fulfil this order, their obligations shall not relieve the SELLER from any liability or obligation under the PO and the SELLER shall be responsible for the acts, omissions, defaults or negligence of any contractor, sub-contractor or its agents, workmen, as fully as if they were the acts, omissions, defaults or negligence of the SELLER.


  • The SELLER shall keep and shall procure to be kept confidential the content of the PO and all information connected with the business of the BUYER or which comes to the SELLER’s knowledge under or as a result of the PO, for a period of 10 years from the expiry or termination of the PO and shall not disclose it to any third party of use it other than for the purposes of the PO except with prior written agreement of the BUYER.
  • The SELLER or any of its SUB-CONTRACTORS shall not, without the prior consent in WRITING of the BUYER, advertise or make known that they supply or have supplied GOODS to the BUYER.
  • The SELLER shall ensure its staff, agents and representatives are aware of and undertake to comply with the obligations and confidentiality set out in this Condition.


  • The BUYER shall be entitled to terminate the PO in accordance with Condition 8 and 9.
  • The BUYER may without prejudice to any other rights or remedies terminate the whole or any part of the PO forthwith if:
    1. Written notice has been given to the SELLER of a substantial and/or persistent breach of any PO (to include persistent refusal) stating the period during which such breach is to be rectified and the SELLER
    2. A court order is made for the winding up of the SELLER
  • There is a material change of control of the SELLER
  1. The SELLER ceases to trade.


The non-enforcement of any of the terms of the PO shall not be construed as a waiver of any of the terms unless expressly set forth in WRITING


The SELLER shall give the BUYER notice in writing within a reasonable time prior to the delivery of the GOODS of anything which is hazardous to the environment or health and safety or persons or property.


No provision of this PO shall be construed as creating any rights enforceable by a third party and all third party rights as may be implied by law are hereby excluded to the fullest extent permitted by law.


  • Any dispute or difference which may arise between BUYER and the SELLER out of or in connection with the PO shall be referred and resolved by arbitration under the Rules of the High Court of International Arbitration, which rules are deemed to be incorporated by reference into this condition. It is agreed to appoint to a single Arbitrator to be agreed between the parties or in the absence of such agreement, to be nominated by the President of the Chartered Institute of Arbitrators upon application of either party. The place of arbitration shall be England and the language shall be English.
  • Performance of the PO shall continue during procedures described in 19.1 & 19.2 and during any negotiations or arbitration proceedings. No payments due or payable by the BUYER or the SELLER shall be withheld on account of pending or current reference to mediation or arbitration in respect of any GOODS or parts thereof which are not in dispute.


Seller’s terms & conditions, if not in accordance with the terms & conditions of this PO, are valid only if specifically agreed to by the BUYER in writing.


The contract entered into by the BUYER and the SELLER shall be governed by the laws of England and any claim or dispute shall be settled by the courts of England.


Terms & Conditions – General

The materials on this Web site are Copyright © 1997-2021 AIR CONTROL INDUSTRIES (ACI). All rights reserved. You are hereby authorized to view, copy, print and distribute these materials subject to the following conditions: The materials may be used for internal informational purposes only in the course of evaluating, specifying, purchasing or servicing ACI products. Any copy of these materials or any portion thereof must include the above copyright notice.

ACI may revoke or modify any of the foregoing rights at any time. Please note that any product, process or technology described in these materials may be the subject of other intellectual property rights reserved by ACI and are not licensed hereunder.

Copyright, Trademark and Patent Protected Materials and Designs Some, or all, of the text, phrases, nomenclature logos, trademarks, images, equipment designs and engineering information contained in this web site are, except as noted herein, protected materials under Copyright © 1997-2021 ACI. Under no circumstances shall anyone be authorized to reuse, recreate (in part or whole) any information contained herein without acknowledgement to ACI and the ACI logo as a registered trademark of ACI. All other product names mentioned herein are the trademarks of their respective owners.

THE INFORMATION CONTAINED IN THIS WEB SITE IS PROVIDED TO YOU “AS IS,” FOR YOUR INFORMATIONAL PURPOSES ONLY, WITHOUT WARRANTY OF ANY KIND, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. This information could contain technical inaccuracies or typographical errors, and information will be changed, updated and deleted without notice. ACI may make improvements and/or changes in the products and/or the programs described in this material at any time. Additionally, ACI makes no representations or warranties whatsoever about any other Web site which you may choose to access through this Web site.


Submitting information to ACI: Please see our privacy policy for general information. ACI DOES NOT want to receive confidential or proprietary information from you through its Web site. Any information that ACI receives through its Web site, other than your personally identifiable information, as explained in ACI privacy policy, will be deemed to be NON-CONFIDENTIAL.

By transmitting to ACI information via this Web site or otherwise through electronic means, you grant to ACI an unrestricted, irrevocable license to use, reproduce, display, modify, perform and distribute such information, and ACI is free to use the information, including any ideas, know-how or techniques contained therein free of charge for any purpose whatsoever. This Web site may contain other proprietary notices and conditions of use, the terms of which must also be observed and followed.

Copyright ACI. 1997-2021



Some or all of the text, nomenclature, phases, logos, trademarks, images, equipment designs and engineering information contained in this web site are, except as noted herein, the exclusive creation and property of ACI copyright 1997-2014. Under no circumstances shall anyone be authorized by ACI to reuse, recreate (in part or whole) any information contained herein.


Terms & Conditions – Environmental Policy

Air Control Industries Limited is committed in its responsibility to maintain Environmental excellence, integrated with its established commitment to quality and safety. The following policy outlines our strategy to ensure that all Environmental issues within the scope of the business are addressed with the aim of minimising the impact on the Environment.

  • Demonstrate a strong sense of responsibility for people and the Environment and ensure that this policy is communicated and implemented at all levels within the Company. Where possible these values will be communicated to our suppliers and customers to encourage adoption of similar principles.
  • Comply with, and where appropriate, exceed legislative and regulatory requirements, applying, where feasible, best available techniques in minimising the Environmental impacts of our activities.
  • Minimise waste by evaluating materials and operations and ensuring they are as efficient as possible.
  • Source and promote a product range that minimises the impact on the Environment in terms of production, distribution and operation.
  • Prevent pollution with continual improvement
  • Ensure this policy is documented, implemented and maintained
  • Set and regularly review our Environmental objectives and targets
  • Ensure this policy is suitable for the application and Environmental impacts of the activities, products and services that make up the business
  • Work actively to increase Environmental awareness through the company & encourage individual employees’ involvement in Environmental issues
  • This policy will be available to all interested parties


Terms & Conditions – Privacy Policy

For our Privacy Policy, please click here.