INFORMATION
The Profile Dryer is the perfect solution for drying complex profiles such as EPDM rubber extrusions, silicon seals, fillers and asymmetric plastic extrusions without risks of distortion. The system draws out and drains moisture from cables, wires and extrusions and where water recycling or spray containment is important.
The unit consists of an innovative blower-driven solution that uses vacuum, with no water or oil content to remove water without damaging ordistorting the extrusions. The profile dryer not only improves rubber and seal drying efficiencies when compared to compressed air nozzle arrangements but also lowers energy consumption and therefore considerably reduces running costs. Drying speed varies with profile size.
The unit is fully enclosed with a small footprint to easily fit into most production lines. The main enclosure contains a lateral channel blower and cooling fan as well as a water separator which drains water as it reaches a certain level. The drying head can be configured to meet customer’s profile specifications.
The Power Pack
The Power Pack The cable dryer requires a standalone, lateral channel blower to run. • 50Hz single-stage blower • Pressure of up to 600 mbar • Noise level up to 80 dB(A) • Suitable for horizontal and vertical installation • Pressure configuration available on request Find out more
General Characteristics:
Product Specifications
Inlet Pressures: up to >-80In.Swg (2.8PSI)
Process Air Temperature: ambient
Size: 0.2mm – 65mm
Running speed: up to 100m/min (328ft/min)
Standard Electrical Supply
1Ph, 220/240V 50Hz
3Ph, 400V, 50Hz
IP66 motor protection
Materials
Flexi-Hose: Reinforced PVC Metal work: Stainless Steel 304 Rollers: Ceramic
Outline Drawing:
