INFORMATION
- The Cable Dryer is engineered to effectively remove residual moisture from water-cooled insulated wire, cable and extruded products.
- It is particularly effective in small diameter production where the system enables reliable production rates of up to 3,950 feet per minute.
- It works by closely focusing powerful angled air jets against the flow of the product. These air jets are aimed at the product to hold back the advancing residual moisture. By breaking the surface tension of the water, it allows it to gather and be removed from the product. Soft-edged flexible rubber baffles help contain the resulting spray, preventing it from exiting the enclosure and thus avoiding spillage and potential health and safety issues.
- The removed water drains from the enclosure and can be piped back into the system to save consumption, costs and improve processes.
- The unit is fully enclosed, adjustable and has a footprint of only 3’ 1” long, which enables it to fit easily into most production lines. The system is available with a choice of three different drying modules to suit most applications.
The Power Pack
The cable dryer requires a standalone, lateral channel blower to run.
• 50Hz to 60Hz channel blower
• Pressure of up to 600 mbar
• Noise level up to 80 dB(A)
• Suitable for horizontal and vertical installation
• Pressure configuration available on request
General Characteristics:
Discharge Figures
Pressures: up to >230″wg (8.3PSI)
Air Temperature: up to 212 Degree F.
Product Capabilities
Diameter: 0.008″ < 2.56″
Running speed: up to 3,950 ft/min
Standard Electrical Supply
3Ph, 460V, 60Hz
IP55 motor protection
Materials
Ultra High Speed:
Face Plates/End Caps: PTFE
Flexi Hose: High temperature, silicone rubber-coated and reinforced glass fabric
Baffles: Neoprene rubber
Enclosed Seal: Closed cell polyethylence sponge
Rollers: Ceramic
High Speed:
Face Plates/End Caps: PTFE
Flexi Hose: High temperature, silicone rubber-coated and reinforced glass fabric
Baffles: Neoprene rubber
Enclosed Seal: Closed cell polyethylence sponge
Rollers: Stainless steel 304
Standard Plate:
Face Plates/End Caps: PTFE
Flexi Hose: Clear polyurethane (internal) and thermo plastic rubber (external)
Baffles: Neoprene rubber
Enclosed Seal: Closed cell polyethylence sponge
Rollers: POM (Plastic)
Ring Dryer:
Flexi Hose: Clear polyurethane (internal) and thermo plastic rubber (external)
Baffles: Neoprene rubber
Enclosed Seal: Closed cell polyethylence sponge
Rollers: POM (Plastic)
Outline Drawing:
