What type of fans does ACI manufacture?
ACI manufactures predominantly high quality curved forward bladed centrifugal fans which are available in single, three phase, DC, or 400Hz; and ATEX/IECEx rated versions. An extensive range of radial bladed units is also available.
What are the maximum pressures ACI fans can produce?
Pressures up to 300Mbar (120 In.Swg).
What exactly is ATEX?
ATEX 94/9/EC is the directive on equipment and protective systems intended for use in potentially explosive atmospheres.
Is ATEX a legal requirement?
As of the 1 July 2003 the directive became EU law and any equipment, electrical or mechanical for installation within the EU member states must now comply.
What industries do ACI supply?

ACI currently supply fan units into many applications and industries including: Oil and Gas, Combustion, Food and Beverage, Paper, Steel, Textiles, Rubber and Plastics and many more. View our applications page for further information.

Can ACI replace other manufacturers fan units?

Yes, we can probably offer an alternative and would be pleased to have a chat about the performance details of the fan you require. Please call +1 877 326 1862

My company is not based in the UK – how do I purchase a fan from you?

ACI has an extensive Distributor Network. If we do not have representation in your country, ACI will be happy to deal directly with you.

Do ACI offer customized products?

At ACI we can design, manufacture and install any customized product to fit your requirements. We will even visit your company site to carry out an evaluation of required use.

What range of volumes can ACI industrial fans convey?
Volume rates up to 212,000 m³/hr (360,000CFM)
What materials are your fans typically constructed from?
ACI fans are typically manufactured from cast aluminium or sheet steel – unpainted or powder coated. Other options include Stainless Steel 304 and 316.
Does my fan have to comply with ATEX?
Yes if it is installed in an onshore zoned area within the EU. Many of our international customers are adopting ATEX as good practice.
Can ACI certify fans?
Yes, ACI has been producing fans to the ATEX requirements for Group II equipment with gas and dust hazards for many years and is now one of the leading fan manufacturers in Europe.
ATEX Fans - where do I start?
As part of the ATEX Directive we have a duty to liaise with our customers and obtain particular information to enable us to select fans of the correct category and certification to satisfy application requirements. To assist you with your enquiries and to help us formulate an appropriate proposal, we offer our ATEX Fan Enquiry Form for completion and submission – this acts as a basis to discuss and agree your requirements.
Can ACI provide spares?

At ACI we can provide all spares and accessories for any of our fan units.

Can you work to large specification and stringent requirements?
At ACI we have a dedicated project department consisting of experienced technical engineers and draughtsmen; set up and trained to handle large specifications and customer requirements that call for most stringent of details.
What are ACI's standard lead times?

For our standard fans/blowers we generally have a lead time of 4-6 weeks depending on how busy we are. Bespoke products generally have a lead time of 8-12 weeks including the design dependent on the complexity. We never promise what we think we cannot deliver, so we will keep you informed every step of the development.

What happens if my fan is damaged?

If your fan has been damaged in any way then please call ACI, stating the serial number that is printed on the fan label.  For more information please call us on +1 877 326 1862