Euroventilatori’s range of axial fans offer flow rates of up to 75,000m3/hr (44,143CFM) and static pressures up to 3In.Swg (75mmWG). Each Euroventilatori range has further possibilities including a choice of finishes and voltages, and many of the axial fans are also available in ATEX rated versions.
ACI also manufactures a range of plastic cased, high flow axial fans specifically for destratification in high buildings to help reduce heating costs.
SEE OUR FAN SERIES BELOW
Air Control Industries Ltd is the official UK distributor for Euroventilatori AXial Fans.
EVc Series
Belt driven in-line axial-flow fan, with light alloy die-cast impeller. Motor placed outside the ducting drum.
The EVC axial fan range is particularly suitable for the suction of fumes and for contaminated, dusty and damp air. This type of fan is mainly used in the spray booths where it helps against the danger of fire due to its construction with spark-proof blades and the motor fixed to the outside of the fan.
- Flow rates up to 65,000M³/Hr
- Static Pressures up to 2.75”WG / 70mmWG
EVP Series
Axial-flow fan with light alloy die cast impeller with wing-profile blades. Single flange ducting drum, directly coupled motor.
The EVP series is suitable for sucking in smoke, as well as vitiated, dusty and wet air in foundries, cement factories, paper factories and joinery works. For the aeration of local rooms, for drying paper, wool, pasta tiles in the application to radiators, unit heaters, cooling towers, etc. and generally where it is necessary to transport big volumes of air with low pressures.
- Flow rates up to 6,000M³/Hr (3,531 cfm)
- Static Pressures up to 0.756”WG / 20mmWG
EVF Series
Axial fan with light alloy die-cast impeller with wing-profile blades. Long cased ducting drum, directly coupled motor.
The EVF axial fan series is suitable for sucking in smoke, as well as vitiated, dusty and wet air in the foundries, cement factories, paper factories and joinery works. For the aeration of local rooms, for drying paper, wool, pasta tiles in the application to radiators, unit heaters, cooling towers, etc. and generally where it is necessary to transport big volumes of air with low pressures.
- Flow rates up to 75,000³/Hr
- Static Pressures up to 3”WG / 75mmWG
EVT Series
Axial-flow fan with light alloy die-cast impeller with wing profile blades. Fiberglass roof, fitted with base for mounting.
These fans are suitable for the suction of vitiated air flue gases and vapour. They are very useful during the summer season in environments where air changes are necessary in order to keep the room ventilated. They are also used for the aeration of workshops, foundries, cement factories, tanneries, joineries, and for chemical mechanical and metallurgical industries where big air volumes have to be sucked at low pressure.
- Flow rates up to 18,000M³/Hr
- Static Pressures up to 1.5″WG / 38mmWG